How To...

Choose OS/Platform for TeamCity Server

Once the server/OS fulfills the requirements, TeamCity can run on any system. Please also review the requirements for the integrations you plan to use, for example the following functionality requires or works better when TeamCity server is installed under Windows:

• VCS integration with TFS

• VCS integration with VSS

• Windows domain logins (can also work under Linux, but may be less stable), especially NTLM HTTP authentication

• NuGet feed on the server (can also work under Linux, but may be less stable)

• Agent push to Windows machines

If you have no preference, Linux platforms may be more preferable due to more effective file system operations and the level of required general OS maintenance.

Final Operating System choice should probably depend more on the available resources and established practices in your organization.

Estimate Hardware Requirements for TeamCity

The hardware requirements differ for the server and the agents.

The agent hardware requirements are basically determined by the builds that are run. Running TeamCity agent software introduces a requirement for additional CPU time (but it can usually be neglected comparing to the build process CPU requirements) and additional memory: about 500Mb. The disk space required corresponds to the disk usage by the builds running on the agent (sources checkouts, downloaded artifacts, the disk space consumed during the build; all that combined for the regularly occurring builds). Although you can run a build agent on the same machine as the TeamCity server, the recommended approach is to use a separate machine (it may be virtual) for each build agent. If you chose to install several agents on the same machine, consider the possible CPU, disk, memory or network bottlenecks that might occur. The Performance Monitor build feature can help you in analyzing live data.

The server hardware requirements depend on the server load, which in its turn depends significantly on the type of the builds and server usage. Consider the following general guidelines.

tip

• If you decide to run an external database on the same machine as the server, take into account hardware requirements with database engine requirements in mind.

• If you face some TeamCity-related performance issues, they should probably be investigated and addressed individually. For example, if builds generate too much data, the server disk system might be needing an upgrade both in size and speed characteristics.

Database Note:
When using the server extensively, the database performance starts to play a greater role.
For reliability and performance reasons you should use an external database.
See the notes on choosing external database.
The database size requirements naturally vary based on the amount of data stored (number of builds, number of tests, and so on). The active server database usage can be estimated at several gigabytes of data per year.

Overview of the TeamCity hardware resources usage:

• CPU: TeamCity utilizes multiple cores of the CPU, so increasing number of cores makes sense. For non-trivial TeamCity usage at least 4 CPU cores are recommended.

• Memory: used by the TeamCity server main process and child processes (used for Maven integration, version control integration, Kotlin DSL execution). See the notes on the main process memory usage. Generally, you will probably not need to dedicate more than 4G of memory to TeamCity server if you do not plan to run more than 100 concurrent builds (agents), support more than 200 online users or work with large repositories.

• HDD/disk usage: This sums up mainly from the temp directory usage (<TeamCity Home>/temp and OS default temp directory) and <TeamCity Data Directory>/system usage. Performance of the TeamCity server highly depends on the disk system performance. As TeamCity stores large amounts of data under <TeamCity Data Directory>/system (most notably, VCS caches and build results), it is important to ensure that the access to the disk is fast (in particular reading/writing files in multiple threads, listing files with attributes). Ensuring disk has good performance is especially important if you plan to store the Data Directory on a network drive. It is recommended to use local storage for TeamCity Data Directory/system/caches directory. See also TeamCity Data Directory.

• Network: This mainly sums up from the traffic from VCS servers, to clients (web browsers, IDE, etc.) and to/from build agents (send sources, receive build results, logs and artifacts).

The load on the server depends on:

• number of build configurations;

• number of builds in the history;

• number of the builds running daily;

• amount of data consumed and produced by the builds (size of the used sources and artifacts, size of the build log, number and output size of unit tests, number of inspections and duplicates hits, size and number of produced artifacts, and so on);

• clean-up rules configured

• number of agents and their utilization percentage;

• number of users having TeamCity web pages open;

• number of users logged in from IDE plugin;

• number and type of VCS roots as well as the configured checking for changes interval for the VCS roots. VCS checkout mode is relevant too: server checkout mode generates greater server load. Specific types of VCS also affect server load, but they can be roughly estimated based on native VCS client performance;

• number of changes detected by TeamCity per day in all the VCS roots;

• the size of the repositories TeamCity works with;

• total size of the sources checked out by TeamCity daily.

A general example of hardware configuration capable to handle up to 100 concurrently running builds and running only TeamCity server can be:
Server-suitable modern multicore CPU, 8Gb of memory, fast network connection, fast and reliable HDD, fast external database access.

Based on our experience, a modest hardware likeIntel 3.2 GHz dual core CPU, 3.2Gb memory under Windows, 1Gb network adapter, single HDDcan provide acceptable performance for the following setup:

• 60 projects and 300 build configurations (with one forth being active and running regularly);

• more than 300 builds a day;

• about 2Mb log per build;

• 50 build agents;

• 50 web users and 30 IDE users;

• 100 VCS roots (mainly Perforce and Subversion using server checkout), average checking for changes interval is 120 seconds;

• more than 150 changes per day;

• Kotlin DSL is not used;

• the database (MySQL) is running on the same machine;

• TeamCity server process has -Xmx1100m JVM setting.

The following configuration can provide acceptable performance for a more loaded TeamCity server:
Intel Xeon E5520 2.2 GHz CPU (4 cores, 8 threads), 12Gb memory under Windows Server 2008 R2 x64, 1Gb network adapter, 3 HDD RAID1 disks (general, one for artifacts, logs and caches storage, and one for the database storage)

Server load characteristics:

• 150 projects and 1500 build configurations (with one third being active and running regularly);

• more than 1500 builds a day;

• about 4Mb log per build;

• 100 build agents;

• 150 web users and 40 IDE users;

• 250 VCS roots (mainly Git, Hg, Perforce and Subversion using agent-side checkout), average checking for changes interval is 180 seconds;

• more than 1000 changes per day;

• the database (MySQL) is running on the same machine;

• TeamCity server process has -Xmx3700m x64 JVM setting.

However, to ensure peak load can be handled well, more powerful hardware is recommended.

HDD free space requirements are mainly determined by the number of builds stored on the server and the artifacts size/build log size in each. Server disk storage is also used to store VCS-related caches and you can estimate that at double the checkout size of all the VCS roots configured on the server.

If the builds generate large number of data (artifacts/build log/test data), using fast hard disk for storing the .BuildServer/system directory and fast network between agents and server are recommended.

The general recommendation for deploying large-scale TeamCity installation is to start with a reasonable hardware while considering hardware upgrade. Then increase the load on the server (e.g. add more projects) gradually, monitoring the performance characteristics and deciding on necessary hardware or software improvements. There is also a benchmark plugin which can be used to estimate the number of simultaneous build the current server installation can handle. Anyway, best administration practices are recommended like keeping adequate disk defragmentation level, and so on.

Starting with an adequately loaded system, if you then increase the number of concurrently running builds (agents) by some factor, be prepared to increase CPU, database and HDD access speeds, amount of memory by the same factor to achieve the same performance.
If you increase the number of builds per day, be prepared to increase the disk size.

If you consider cloud deployment for TeamCity agents (for example, on Amazon EC2), also review Setting Up TeamCity for Amazon EC2

A note on the agents' setup in JetBrains internal TeamCity installation:
We use both separate machines each running a single agent and dedicated "servers" running several virtual machines each of them having a single agent installed. Experimenting with the hardware and software we settled on a configuration when each core7i physical machine runs 3 virtual agents, each using a separate hard disk. This stems form the fact that our (mostly Java) builds depend on HDD performance in the first place. But YMMV.

TeamCity is known to work well with 500+ build agents (500 concurrently running builds actively logging build run-time data). In synthetic tests the server was functioning OK with as many as 1000 concurrent builds (the server with 8 cores, 32Gb of total memory running under Linux, and MySQL server running on a separate comparable machine). The load on the server produced by each build depends on the amount of data the build produces (build log, tests number and failure details, inspections/duplicates issues number, etc.). Keeping the amount of data reasonably constrained (publishing large outputs as build artifacts, not printing those into standard output; tweaking inspection profiles to report limited set of the most important inspection hits, etc.) will help scale the server to handle more concurrent builds.
If you need much more agents/parallel builds, it is recommended to use several nodes setup. If a substantially large amount of agents is required, it is recommended to consider using several separate TeamCity instances and distributing the projects between them. We constantly work on TeamCity performance improvements and are willing to work closely with organizations running large TeamCity installations to study any performance issues and improve TeamCity to handle larger loads. See also a related post on the maximum number of agents which TeamCity can handle

See also a related post: description of a substantial TeamCity setup.

Configuring TeamCity Server for Performance

Here are some recommendations to tweak TeamCity server setup for better performance. The list for production server use is a prerequisite:

• Regularly review reported Server Health reports (including hidden ones)

• Use a separate reverse proxy server (e.g. NGINX) to handle HTTPS

• Use a separate server for the external database and monitor the database performance

• Monitor the server's CPU and IO performance, increase hardware resources as necessary (see also hardware notes)

• Make sure clean-up is configured for all the projects with a due retention policy, make sure clean-up completely finishes regularly (check Administration / Clean-Up page)

• Consider ensuring good IO performance for the <TeamCity Data Directory>/system/caches directory, e.g. by moving it to a separate local drive (or storing on a local drive you choose to store the TeamCity Data Directory on a network storage)

• Regularly archive obsolete projects

• Regularly review the installed not bundled plugins and remove those not essential for the server functioning

• Consider using agent-side checkout whenever possible

• Make sure the build logs are not huge (tens megabytes at most, better less than 10 Mb)

• If lots VCS roots are configured on the server, consider configuring repository commit hooks instead of using polling for changes or at least increase VCS polling interval to 300 seconds or more

• If the server is often used by large number of users (e.g. more than 1000), consider reducing the frequency of background UI requests their by increasing UI refresh intervals

• When regularly exceeding 500 concurrently running builds which log a lot of data, consider using Several Nodes Setup

Retrieve Administrator Password

On the first start with the empty database, TeamCity displays the Administrator Setup page which allows creating a user with full administrative permissions (assigning the System Administrator role).

If you want to regain access to the system and you cannot log in as a user with the System Administrator role, you can log in as a super user and change the existing administrator account password or create a new account with the System Administrator role.

It is also possible to use REST API to add the System Administrator role to any existing user.

If you use built-in authentication and have correct email specified, you can reset the password from the login page.

Estimate External Database Capacity

It is quite hard to provide the exact numbers when setting up or migrating to an external database, as the required capacity varies greatly depending on how TeamCity is used.

The database size and database performance are crucial aspects to consider.

Database Size

The size of the database will depend on:

• how many builds are started every day

• how many test are reported from builds

• clean-up rules (retention policy)

• clean-up schedule

We recommend the initial size of data spaces to be 4 GB. When migrating from the internal database, we suggest at least doubling the size of the current internal database. For example, the size of the external database (without the Redo Log files) of the internal TeamCity server in JetBrains is about 50 GB. Setting your database to grow automatically helps to increase file sizes to a predetermined limit when necessary, which minimizes the effort to monitor disk space.

Allocating 1 GB for the redo log (see the table below) and undo files is sufficient in most cases.

Database Performance

The following factors are to be taken into account:

• type of database (RDBMS)

• number of agents (which actually means the number of builds running in parallel)

• number of web pages opened by all users

• clean-up rules (retention policy)

It is advised to place the TeamCity Data Directory and database data files on physically different hard disks (even when both the TeamCity server and RDBMS share the same host).

Placing redo logs on a separate physical disk is also recommended especially in case of the high number of agents (50 and more).

Database-specific considerations

The redo log (or a similar entity) naming for different RDBMS:

PostgreSQL: We recommend using version 9.2+, which has a lot of query optimization features. Also see the information on the write-ahead-log (WAL) in the PostgreSQL documentation

Oracle: it is recommended to keep statistics on: all automatically gathered statistics should be enabled (since Oracle 10.0, this is the default setup). Also see the information on redo log files in the Oracle documentation.

MS SQL Server: it is NOT recommended to use the jTDS driver: it does not work with nchar/nvarchar, and to preserve unicode streams it may cause queries to take a long time and consume a lot of IO. Also see the information on redo log in the Microsoft Knowledge base. If you use jTDS, please migrate.

MySQL: the query optimizer might be inefficient: some queries may get a wrong execution plan causing them to take a long time and consume huge IO.

Estimate the Number of Required Build Agents

There are no precise data and the number of required build agents depends a lot on the server usage pattern, type of builds, team size, commitment of the team to CI process, and so on.
The best way is to start with the default 3 agents and see how that plays with the projects configured, then estimate further based on that.

You might want to increase the number of agents when you see:

• builds waiting for an idle agent in the build queue;

• more changes included into each build than you find comfortable (for example, for build failures analysis);

• necessity for different environments. We've seen patterns of having an agent per each 20 build configurations (types of builds). Or a build agent per 1-2 developers.

See also notes on maximum supported number of agents.

Setup TeamCity in Replication/Clustering Environment

It is possible to add a secondary TeamCity node to ensure high availability and offload some operations from the main server. All nodes need to be connected to the same TeamCity Data Directory and the database.

To address fast disaster recovery scenarios, TeamCity supports active - failover (cold standby) approach: the data that the TeamCity server uses can be replicated and a solution put in place to start a new server using the same data if the currently active server malfunctions.

As to the data, the TeamCity server uses both database and file storage (Data Directory). You can browse through TeamCity Data Backup and TeamCity Data Directory pages in to get more information on TeamCity data storing. Basically, both the TeamCity Data Directory on the disk and the database which TeamCity uses must remain in a consistent state and thus must be replicated together.
Only a single TeamCity server instance should use the database and Data Directory at any time.

Ensure that the distribution of the TeamCity failover/backup server is of exactly the same version as the main server. It is also important to ensure the same server environment/startup options like memory settings, and so on.

TeamCity agents farm can be reused between the main and the failover servers. Agents will automatically connect to the new server if you make the failover server to be resolved via the old server DNS name and agents connect to the server using the DNS name. See also information on switching from one server to another.
If appropriate, the agents can be replicated just as the server. However, there is no need to replicate any TeamCity-specific data on the agents except for the conf\buildAgent.properties file as all the rest of the data can typically be renewed from the server. In case of replicated agents farm, the replica agents just need to be connected to the failover server.

In case of two servers installations for redundancy purposes, they can use the same set of licenses as only one of them is running at any given moment.

TeamCity Security Notes

The contents of this section have been moved to the dedicated article.

Configure Newly Installed MySQL Server

If MySQL server is going to be used with TeamCity in addition to the basic setup, you should review and probably change some of the MySQL server settings. If MySQL is installed on Windows, the settings are located in my.ini file which usually can be found under MySQL installation directory. For Unix-like systems the file is called my.cnf and can be placed somewhere under /etc directory. Read more about configuration file location in MySQL documentation. Note: you'll need to restart MySQL server after changing settings in my.ini|my.cnf.

The following settings should be reviewed and/or changed:

show table status like '<table name>';

show table status like '%';

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system. Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=2000M

innodb_log_file_size=1024M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=2

binlog-format=mixed

GRANT PROCESS ON *.* TO <teamcity-user-name>;

Configure Newly Installed PostgreSQL Server

For better TeamCity server performance, it is recommended to change some of the parameters of the newly installed PostgreSQL server. You can read more about PostgreSQL performance optimization in PostgreSQL Wiki.

The parameters below can be changed in the postgresql.conf file located in the in PostgreSQL's data directory.

shared_buffers=512MB

max_wal_size = 1500MB
checkpoint_completion_target=0.9

checkpoint_segments=32
checkpoint_completion_target=0.9

synchronous_commit=off

Set Up TeamCity behind a Proxy Server

The contents of this section have been moved to the dedicated article.

Enforce hiding stacktrace

If a user with access to your TeamCity server submits an invalid cross-site scripting (XSS) payload, the server will display the "Unexpected error" page containing a related stacktrace. To prevent exposing any sensible information about your environment via this stacktrace, you might want to disable its display. For this, set the teamcity.web.runtimeError.showStacktrace internal property to false.

Configure HTTPS for TeamCity Web UI

TeamCity does not provide out-of-the-box support for HTTPS access (see TW-12976). It is highly recommended to set up a reverse proxy like NGINX or Apache in front of TeamCity that would handle HTTPS and use HTTP TeamCity server port as the upstream. HTTPS-related configuration of the proxy is not specific for TeamCity and is generic as for any web application. Make sure to configure the reverse proxy per our recommendations. Generic web application best practices apply (like disabling http access to TeamCity at all).

For small servers, you can set up HTTPS via the internal Tomcat means, but this is not recommended as it may significantly increase the CPU load.

For configuring clients to access TeamCity server via HTTPS while using self-signed certificate, check the related instructions.

Configure TeamCity to Use Proxy Server for Outgoing Connections

The contents of this section have been moved to the dedicated article.

Configure TeamCity Agent to Use Proxy To Connect to TeamCity Server

This section covers the configuration of a proxy server for TeamCity agent-to-server connections.

On the TeamCity agent side, specify the proxy to connect to TeamCity server using the following properties in the buildAgent.properties file:

## The domain name or the IP address of the proxy host and the port
teamcity.http.proxyHost=123.45.678.9
teamcity.http.proxyPort=8080

## If the proxy requires authentication, specify the login and password
teamcity.http.proxyLogin=login
teamcity.http.proxyPassword=password

Note that the proxy has to be configured not to cache any TeamCity server responses; for example, if you use Squid, add "cache deny all" line to the squid.conf file.

Install Multiple Agents on the Same Machine

See the corresponding section under agent installation documentation.

Change Server Port

See corresponding section in server installation instructions.

Test-drive Newer TeamCity Version before Upgrade

It's advised to try a new TeamCity version before upgrading your production server. The usual procedure is to create a copy of your production TeamCity installation, then upgrade it, try the things out, and, when everything is checked, drop the test server and upgrade the main one. When you start the test server, remember to change the Server URL, disable Email and Jabber notifiers as well as other features on the new server.

Create a Copy of TeamCity Server with All Data

In case you want to preserve the original server as well as the copy, make sure to check the licensing considerations.

Move TeamCity Projects from One Server to Another

If you need to move data to a fresh server without existing data, it is recommended to move the server or copy it and then delete the data which is not necessary on the new server.

If you need to join the data with already existing data on the new server, there is a dedicated feature to move projects with most of the associated data from one server to another: Projects Import.

Here are some notes on manual move of the settings in case you ever want to perform it

It is possible to move settings of a project or a build configuration to another server with simple file copying.

The two TeamCity servers (source and target) should be of exactly the same version (same build).

All the identifiers throughout all the projects, build configurations and VCS roots of both servers should be unique. If they are not, you can change them via web UI. If entities with the same id are present on different servers, the entities are assumed to be the same. For example this is useful for having global set of VCS roots on all the servers.

To move settings of the project and all its build configuration from one server to another:

From the TeamCity Data Directory, copy the directories of corresponding projects (.BuildServer\config\projects\<id>) and all its parent projects to .BuildServer\config\projects of the target server. This moves project settings, build configuration settings, VCS roots defined in the projects preserving the links between them. If there are same-named files on the target server as those copied, this can happen in case of a) id match: same entities already exist on the target server, in which case the clashing files can be excluded from copying, or b) id clash: different entities happen to have same ids. In this case it should be resolved either by changing entity ID on the source or target server to fulfill the uniqueness requirement.

The set of parent projects is to be identified manually based on the web UI or the directory names on disk (which be default will have the same prefix).

Note: It might make sense to keep the settings of the root project synchronized between all the servers (by synchronizing content of .BuildServer\config\projects_Root directory). For example, this will ensure same settings for the default clean-up policy on all the servers.

Further steps after projects copying might be:

• delete unused data in the copied parent projects (if any) on the target server

• use "server health" reports to identify duplicate VCS roots appeared in result of copying, if any

• archive the projects on the source server and adjust clean-up rules (to be able to see build's history, if necessary)

What is not copied by the approach above:

• pausing comment and user of the paused build configurations

• archiving user of the archived projects

• global server settings (for example, Maven settings.xml profiles, tools like handle.exe, external change viewers, build queue priorities, issue trackers). These are stored under various files under .BuildServer\config directory and should be synchronized either on the file level or by configuring the same settings in the server administration UI.

• project association with agent pools

• templates from other projects which are not parents of the copied one. This configuration is actually deprecated in TeamCity 8.0 and is only supported as legacy. Templates used in several projects should be moved to the common parent project or root project.

• no data configured for the agents (build configurations that are allowed to run on the agent).

• no user-related or user group-related settings (like roles and notification rules)

• no state-related data like mutes and investigations.

Move TeamCity Installation to a New Machine

If you need to move an existing TeamCity installation to new hardware or a clean OS, you can install the same TeamCity version on the new machine, stop the old server, connect the new server to the same TeamCity Data Directory and make sure the server uses the same environment. Alternatively, you can follow the instructions on copying the server from one machine to another.

After the move, make the clients use the new server address, if changed.

You can use the existing license keys when you move the server from one machine to another (as long as there are no two servers running at the same time). As license keys are stored under <TeamCity Data Directory>, you transfer the license keys with all the other TeamCity settings data.

It is usually advised not to combine TeamCity update with any other actions, like environment or hardware changes, and perform the changes one at a time so that, if something goes wrong, the cause can be easily tracked.

Move TeamCity Agent to a New Machine

Apart from the binaries, TeamCity agent installation stores its configuration and data left from the builds it run. Usually the data from the previous builds makes preparation for the future builds a bit faster, but it can be deleted if necessary. The configuration is stored under conf and launcher\conf directories. The data collected by previous build is stored under work and system directories.

The simplest way to move agent installation into a new machine or new location is to:

• stop existing agent

• install a new agent on the new machine

• copy conf/buildAgent.properties from the old installation to a new one

• start the new agent. With these steps the agent will be recognized by TeamCity server as the same and will perform clean checkout for all the builds.

Please also review the section for a list of directories that can be deleted without affecting builds consistency.

Share the Build number for Builds in a Chain Build

A build number can be shared for builds connected by a snapshot dependency or an artifact dependency using a reference to the following dependency property: %dep.<btID>.system.build.number%.

For example, you have build configurations A and B that you want to build in sync: use the same sources and take the same build number.
Do the following:

1. Create build configuration C, then snapshot dependencies: A on C and B on C.

2. Set the Build number format in A and B to:

%dep.<btID>.system.build.number%

Where <btID> is the ID of the build configuration C. The approach works best when builds reuse is turned off via the Snapshot Dependencies snapshot dependency option set to off.

Read more about dependency properties.

Please watch/comment the issue related to sharing a build number TW-7745.

Make Temporary Build Files Erased between the Builds

Update your build script to use path stored in ${teamcity.build.tempDir} (Ant's style name) property as the temp directory. TeamCity agent creates the directory before the build and deletes it right after the build.

Clear Build Queue if It Has Too Many Builds due to a Configuration Error

Try pausing the build configuration that has the builds queued. On build configuration pausing all its builds are removed form the queue.
Also there is an ability to delete many builds from the build queue in a single dialog.

Automatically create or change TeamCity build configuration settings

If you need a level of automation and web administration UI does not suite your needs, there several possibilities:

• use REST API

• change configuration files directly on disk (see more at <TeamCity Data Directory>)

• write a TeamCity Java plugin that will perform the tasks using open API.

Attach Cucumber Reporter to Ant Build

If you use Cucumber for Java applications testing you should run cucumber with --expand and special --format options. More over you should specify RUBYLIB environment variable pointing on necessary TeamCity Rake Runner ruby scripts:

<<target name="features">
     <java classname="org.jruby.Main" fork="true" failonerror="true">
       <classpath>
         <pathelement path="${jruby.home}/lib/jruby.jar"/>
         <pathelement path="${jruby.home}/lib/ruby/gems/1.8/gems/jvyaml-0.0.1/lib/jvyamlb.jar"/>
         ....
       </classpath>
       <jvmarg value="-Xmx512m"/>
       <jvmarg value="-XX:+HeapDumpOnOutOfMemoryError"/>
       <jvmarg value="-ea"/>
       <jvmarg value="-Djruby.home=${jruby.home}"/>
       <arg value="-S"/>
       <arg value="cucumber"/>
       <arg value="--format"/>
       <arg value="Teamcity::Cucumber::Formatter"/>
       <arg value="--expand"/>
       <arg value="."/>
       <env key="RUBYLIB"
            value="${agent.home.dir}/plugins/rake-runner/rb/patch/common${path.separator}${agent.home.dir}/plugins/rake-runner/rb/patch/bdd"/>
       <env key="TEAMCITY_RAKE_RUNNER_MODE" value="buildserver"/>
     </java>
   </target>

Please check the RUBYLIB path separator (';' for Windows, ':' for Linux, or '${path.separator}' in ant for safety).
If you are launching Cucumber tests using the Rake build language, TeamCity will add all necessary command line parameters and environment variables automatically. This tip works in TeamCity version >= 5.0.

Get Last Successful Build Number

Use URL like this:

http://<your TeamCity server>/app/rest/buildTypes/id:<ID of build configuration>/builds/status:SUCCESS/number

The build number will be returned as a plain-text response.
For <ID of build configuration>, see Identifier.
This functionality is provided by REST API

Set up Deployment for My Application in TeamCity

TeamCity has enough features to handle orchestration part of the deployments with the actual deployment logic configured in the build script / build runner. TeamCity supports a variety of generic build tools, so any specific tool can be run from within TeamCity. To ease specific tool usage, it is possible to wrap it into a meta-runner or write a custom plugin for that.

In general, setup steps for configuring deployments are:

1. Write a build script that will perform the deployment task for the binary files available on the disk. (e.g. use Ant or MSBuild for this. For typical deployment transports use Deployer runners). See also Integrate with Build and Reporting Tools. You can use Meta-Runner to reuse a script with convenient UI.

2. Create a build configuration in TeamCity that will execute the build script and perform the actual deployment. If the deployment is to be visible or startable only by the limited set of users, place the build configuration in a separate TeamCity project and make sure the users have appropriate permissions in the project.

3. In this build configuration configure artifact dependency on a build configuration that produces binaries that need to be deployed.

4. Configure one of the available triggers in the deploying build configuration if you need the deployment to be triggered automatically (e.g. to deploy last successful of last pinned build), or use "Promote" action in the build that produced the binaries to be deployed.

5. Consider using snapshot dependencies in addition to artifact ones and check Build Chains tab to get the overview of the builds. In this case artifact dependency should use "Build from the same chain" option.

6. If you need to parametrize the deployment (e.g. specify different target machines in different runs), pass parameters to the build script using custom build run dialog. Consider using Typed Parameters to make the custom run dialog easier to use or handle passwords.

7. If the deploying build is triggered manually consider also adding commands in the build script to pin and tag the build being deployed (via sending a REST API request). You can also use a build number from the build that generated the artifact.

Further recommendations:

• Setup a separate build configurations for each target environment

• Use build's Dependencies tab for navigation between build producing the binaries and deploying builds/tasks

• If necessary, use parameter with "prompt" display mode to ask for "confirmation" on running a build

• Change title of the build configuration "Run" button

Use an External Tool that My Build Relies on

If you need to use specific external tool to be installed on a build agent to run your builds, you have the following options:

• Install and register the tool in TeamCity:

  1. Install the tool on all the agents that will run the build. This can be done manually or via an automated script. For simple file distribution also see Installing Agent Tools

  2. Add a property into buildAgent.properties file (or add environment variable to the system) with the tool home location as the value.

  3. Add agent requirement for the property in the build configuration.

  4. Use the property in the build script.

• Check in the tool into the version control and use relative paths.

• Add environment preparation stage into the build script to get the tool form elsewhere.

• Create a separate build configuration with a single "fake" build which would contain required files as artifacts, then use artifact dependencies to send files to the target build.

Integrate with Build and Reporting Tools

If you have a build tool or a tool that generates some report/provides code metrics which is not yet supported by TeamCity or any of the plugins, most probably you can use it in TeamCity even without dedicated integration.

The integration tasks involved are collecting the data in the scope of a build and then reporting the data to TeamCity so that they can be presented in the build results or in other ways.

Data collection

The easiest way for a start is to modify your build scripts to make use of the selected tool and collect all the required data.
If you can run the tool from a command line console, then you can run it in TeamCity with a command line runner. This will give you detection of the messages printed into standard error output. The build can be marked as failed is the exit code is not zero or there is output to standard error via build failure condition.
If the tool has launchers for any of the supported build scripting engines like Ant, Maven or MSBuild, then you can use corresponding runner in TeamCity to start the tool. See also Use an External Tool that My Build Relies on for the recommendations on how to run an external tool.

You can also consider creating a Meta Runner to let the tool have dedicated UI in TeamCity.

For an advanced integration a custom TeamCity plugin can be developed in Java to ease tool configuration and running.

Presenting data in TeamCity

The build progress can be reported to TeamCity via service messages and build status text can also be updated.

For testing tools, if they are not yet supported you can report tests progress to TeamCity from the build via test-related service messages or generate one of the supported XML reports in the build and let it be imported via a service message of configured XML Report Processing build feature.

To present the results for a generic report, the approach might be to generate HTML report in the build script, pack it into archive and publish as a build artifact. Then configure a report tab to display the HTML report as a tab on build's results.

A metrics value can be published as TeamCity statistics via service message and then displayed in a custom chart. You can also configure build failure condition based on the metric.

If the tool reports code-attributing information like Inspections or Duplicates, TeamCity-bundled report can be used to display the results. A custom plugin will be necessary to process the tool-specific report into TeamCity-specific data model. Example of this can be found in XML Test Reporting plugin and FXCop plugin (see a link on Open-source Bundled Plugins).

See also Import coverage results in TeamCity.

For advanced integration, a custom plugin will be necessary to store and present the data as required. See Developing TeamCity Plugins for more information on plugin development.

Restore Just Deleted Project

TeamCity moves deleted projects settings directories (which are named after the project id) to <TeamCity Data Directory>/config/_trash directory adding "<internal ID>" suffix to the directories.

To restore a project, find the project directory in the _trash directory and move it into regular projects settings directory: <TeamCity Data Directory>/config/projects while removing the ".projectN" suffix from the directory name.
You can do this while server is running, it should pick up the restored project automatically.

Note that TeamCity preserves builds history and other data stored in the database for deleted projects/build configurations for 5 days after the deletion time. All the associated data (builds and test history, changes, etc.) is removed during the next clean-up after the configurable (5 days by default) timeout elapses.

The config/_trash directory is not cleaned automatically and can be emptied manually if you are sure you do not need the deleted projects. No server restart is required.

Transfer 3 Default Agents to Another Server

This is not possible.

Each TeamCity server (Professional and Enterprise) allows using 3 or more agents bound to the server without any agent licenses. In case of the Professional server, by default 3 agents are bound to the server instance: users do not pay for these agents, there is no license key for them.
In case of the Enterprise server, the number of agents depends on your package and the agents are bound to the server license key.

So, the agents bound to the server cannot be transferred to another server.

If you need more build agents that are included with your TeamCity server, you can purchase additional build agent licenses and connect more agents in addition to those that come bound with the server.

See more on licensing.

Import coverage results in TeamCity

TeamCity comes bundled with IntelliJ IDEA/Emma and, JaCoCo coverage engines for Java and dotCover/NCover/PartCover for .NET.

However, there are plenty of other coverage tools out there, like Cobertura and others which are not directly supported by TeamCity.

In order to achieve similar experience with these tools you can:

• publish a coverage HTML report as TeamCity artifact: most of the tools produce coverage report in HTML format, you can publish it as artifact and configure report tab to show it in TeamCity. If artifact is published in the root artifact directory and its name is coverage.zip and there is index.html file in it, report tab will be shown automatically. As to running an external tool, check Integrate with Build and Reporting Tools.

• extract coverage statistics from coverage report and publish statistics values to TeamCity with help of service message: if you do so, you'll see coverage chart on build configuration Statistics tab and also you'll be able to fail a build with the help of a build failure condition on a metric change (for example, you can fail build if the coverage drops).

note

You should not publish values CodeCoverageB, CodeCoverageL, CodeCoverageM, CodeCoverageC standing for block/line/method/class coverage percentage. TeamCity will calculate these values using their absolute parts. For example, CodeCoverageL will be calculated as CodeCoverageAbsLCovered divided by CodeCoverageAbsLTotal. You could publish these values but in this case they will lack decimal parts and will not be useful.

Recover from "Data format of the Data Directory (NNN) and the database (MMM) do not match" error

If you get "Data format of the Data Directory (NNN) and the database (MMM) do not match." error on starting TeamCity, it means either the database or the TeamCity Data Directory were recently changed to an inconsistent state so they cannot be used together. Double-check the database and Data Directory locations and change them if they are not those where the server used to store the data.

If they are right, most probably it means that the server was upgraded with another database or Data Directory and the consistent upgrade requirement was not met for your main Data Directory and the database.

To recover from the state you will need backup of the consistent state made prior to the upgrade. You will need to restore that backup, ensure the right locations are used for the Data Directory and the database and perform the TeamCity upgrade.

Debug a Build on a Specific Agent

In case a build fails on some agent, it is possible to debug it on this very agent to investigate agent-specific issues. Do the following:

1. Go to the Agents page in the TeamCity web UI and select the agent.

2. Disable the agent to temporarily remove it from the build grid. Add a comment (optional). To enable the agent automatically after a certain time period, check the corresponding box and specify the time.

3. Select the build to debug.

4. Open the Custom Run dialog and specify the following options: a. In the Agent drop-down menu, select the disabled agent. b. It is recommended to select the run as Personal Build option to avoid intersection with regular builds.

5. When debugging is complete, enable the agent manually if automatic reenabling has not been configured.

You can also perform remote debugging of tests on an agent via the IntelliJ IDEA plugin for TeamCity.

Debug a Part of the Build (a build step)

If a build containing several steps fails at a certain step, it is possible to debug the step that breaks. Do the following:

1. Go to the build configuration and disable the build steps up to the one you want to debug.

2. Select the build to debug.

3. Open the Custom Run dialog and select the put the build to the queue top to give you build the priority.

4. When debugging is complete, reenable the build steps.

Watch Several TeamCity Servers with Windows Tray Notifier

TeamCity Tray Notifier is used normally to watch builds and receive notifications from a single TeamCity server. However, if you have more than one TeamCity server and want to monitor them with Windows Tray Notifier simultaneously, you need to start a separate instance of Tray Notifier for each of the servers from the command line with the /allowMultiple option:

• From the TeamCity Tray Notifier installation folder (by default, it's C:\Program Files\JetBrains\TeamCity) run the following command:

JetBrains.TrayNotifier.exe /allowMultiple

Optionally, for each of the Tray Notifier instances you can explicitly specify the URL of the server to connect using the /server option. Otherwise, for each further tray notifier instance you will need to log out and change the server's URL via the UI.

JetBrains.TrayNotifier.exe /allowMultiple /server:http://myTeamCityServer

See also details in the issue tracker.

Personal User Data Processing

In relation to the TeamCity product, JetBrains does not collect any personal data of the on-premises TeamCity installation users. The related documents governing relationship of customers with JetBrains are available on the official website: privacy policy, terms of purchase, TeamCity license agreement.

The notes below can be useful when assessing how your usage of TeamCity complies with the General Data Protection Regulation (GDPR) (EU) 2016/679 regulation. These notes are meant to address the most basic questions and can serve as an input to the assessment of your specific TeamCity installation.

The notes are based on TeamCity 2017.2.4 which is actual at the moment of GDPR enforcement date. Please update your TeamCity instance at least to this version, as previous versions might contain issues not in line with the notes below.