Naming style
JetBrains Rider helps you define, control, and apply desired naming styles for symbols in your code. There is a set of rules, each of which targets specific identifiers with the set of constraints (for example, a rule can target static private readonly fields) . Each rule can have one or more associated styles that define capitalization of compound words, underscores, suffixes, prefixes, and so on.
These rules are taken into account when JetBrains Rider produces new code with code completion and code generation features, applies code templates and performs refactorings. JetBrains Rider also helps you detect and fix violations of naming rules. If necessary, the automatic checkup of naming rules can be configured or disabled.
Configure naming rules
Out of the box, JetBrains Rider provides a set of naming rules that cover all kinds of identifiers. These rules are based on the Microsoft Naming Guidelines, .NET Platform Coding Style, and various best practices.
If your personal preferences or company standards differ from JetBrains Rider defaults, you can configure the naming style in a flexible way: for each type of identifier you can choose capitalization rules, prefixes and suffixes, variations for different access rights, abbreviations to ignore, and more.
Your naming style preferences are saved using the mechanism of layer-based settings. Among other things, this mechanism allows you to maintain different preferences for different solutions as well as to keep these preferences under a VCS and automatically share them with your team members.
Properties of a naming rule
Each naming rule has the following properties:
Rule Description: An arbitrary description that helps understand where the rule is applied.
Apply this style: One or more naming styles allowed by the rule. Use the corresponding buttons to add or remove styles.
When a style is selected in the list, choose the base style such as
UpperCamelCase
orlowerCamelCase
in the Style selector, and optionally add prefix and suffix.When there are several styles for a single rule, JetBrains Rider does not report code style violation if a corresponding symbol name matches at least one of these styles. Otherwise, JetBrains Rider detects a code style violation and suggests renaming the symbol according to the default style (the first style in the list). To change the default style, use Move Up and Move Down buttons.
To the following elements: This area defines where the naming rule is applied. Use the corresponding checkboxes to specify what kinds of types and members with which modifiers must comply with the rule.
Enable inspections: This checkbox allows you to disable reporting code style violations associated with this rule, while still allowing JetBrains Rider to detect other naming rule violations.
When this checkbox is disabled, the rule will be respected when JetBrains Rider produces new code with code completion and code generation features, applies code templates and performs refactorings. There are also several ways to disable automatic checkup for all naming rules.
![JetBrains Rider: Add/Edit Naming Rule dialog JetBrains Rider: Add/Edit Naming Rule dialog](https://resources.jetbrains.com.cn/help/img/rider/2024.2/edit_naming_rule_dialog.png)
Modify a naming rules
In Rider settings Ctrl+Alt+S, go to Naming tab.
and open theDouble-click the desired rule in the list.
Configure the properties of the naming rule as needed.
Click OK to close the Edit Rule Settings dialog.
Click Save in the Settings dialog to apply the modifications and let JetBrains Rider choose where to save them, or save the modifications to a specific settings layer by choosing this layer from the Save selector. For more information, see layer-based settings.
If the existing rules are not granular enough for your naming convention, you can add more rules. For example, you may want that enums had upper camel case capitalization and the E
prefix.
Add a naming rule
Press Ctrl+Alt+S or choose
(Windows and Linux) or (macOS) from the menu , then choose on the left.Click '+'.
Configure the properties of the naming rule as needed.
Click OK to close the Add Naming Rule dialog.
Click Save in the Settings dialog to apply the modifications and let JetBrains Rider choose where to save them, or save the modifications to a specific settings layer by choosing this layer from the Save selector. For more information, see layer-based settings.
Any naming rule can be removed. A potential consequence of removing a rule is that some kinds of identifiers will not be covered by any rule. In this case, JetBrains Rider will apply its internal defaults when JetBrains Rider produces new code with code completion and code generation features, applies code templates and performs refactorings.
To remove a rule, select it on the Delete.
page of JetBrains Rider settings Ctrl+Alt+S and clickUse EditorConfig to configure naming rules
If you use EditorConfig to maintain code styles for your project, you can also configure naming rules from .editorconfig files.
To configure naming rules from EditorConfig, you have to select the Read settings from editorconfig, project settings and rule sets checkbox on the page of JetBrains Rider settings Ctrl+Alt+S.
You can also export naming styles that you already configured in JetBrains Rider settings to an .editorconfig file.
Naming style settings in .editorconfig files are configured using the properties of .NET naming conventions for EditorConfig: dotnet_naming_rule.*
, dotnet_naming_style.*
, dotnet_naming_symbols.*
— will work if the specified kinds of symbols can be matched by kinds of symbols available in JetBrains Rider naming settings.
In addition to that, JetBrains Rider can use a number of custom properties to support cases not covered by .NET naming conventions. These properties mainly appear in .editorconfig files when you export JetBrains Rider naming settings.
import_to_resharper
This suffix allows specifying whether a specific property should be ignored by JetBrains Rider (
true
orfalse
).When JetBrains Rider exports its settings to editorconfig, it could also write
as_predefined
— don't change that manually. Example:dotnet_naming_rule.protected_rule_rule.import_to_resharper = false
resharper_description
Allows specifying a rule description for tooltips. Example:
dotnet_naming_rule.protected_rule_rule.resharper_description = Something
resharper_guid
JetBrains Rider can use this property when exporting, do not change it manually. Example:
dotnet_naming_rule.protected_rule_rule.resharper_guid = eb5720f3-bc0a-442d-9f3c-8dc32b7c5c12
resharper_style
Allows specifying a list of possible styles, which can extend the list of .NET naming styles. Each style could be "style" or "prefix + style + suffix" or "prefix + style" or "style + suffix".
A style can be one of
AaBb
,AaBb_AaBb
,AaBb_aaBb
,aaBb
,aaBb_AaBb
,aaBb_aaBb
,AA_BB
,aa_bb
,Aa_bb
You can add
:do_not_check
at the end of the list to disable inspections.Example:
dotnet_naming_rule.protected_rule_rule.resharper_style = AA_BB, aa_bb, I+AaBb, aaBb_AaBb, AaBb+Local
resharper_applicable_kinds
Identifier kind to apply the naming rule to:
namespace
,type
,test_type
,class
,pure_class
,record
,struct
,interface
,delegate
,enum
,type_member
,test_member
,method
,async_method
,extension_method
,property
,event
,any_field
,field
(simple field, not readonly or constant),readonly_field
,constant_field
,unity_serialised_field
(if the Unity Support plugin is enabled),enum_member
local
,local_variable
,catch_variable
,local_constant
,parameter
,lambda_parameter
,label
,type_parameter
,local_function
Example:
dotnet_naming_symbols.protected_rule_symbols.resharper_applicable_kinds = pure_class
resharper_required_modifiers
static
,instance
(none, one of these or both). Example:dotnet_naming_symbols.protected_rule_symbols.resharper_required_modifiers = static, instance
resharper_csharp_naming_rule
Use the same value as for
resharper_style
, but this setting could only be used to specify one of predefined rules:types_and_namespaces
,interfaces
,type_parameters
,method
,property
,event
,locals
,local_constants
,parameters
,public_fields
,private_instance_fields
,private_static_fields
,constants
,private_constants
,static_readonly
,private_static_readonly
,enum_member
,local_functions
,other
Example:
resharper_csharp_naming_rule.private_instance_fields = I+AaBb_AaBb,_+aaBb:do_not_check
As EditorConfig convention suggests, JetBrains Rider will apply naming rules defined in files named .editorconfig in the directory of the current file and in all its parent directories until it reaches the root filepath or finds an EditorConfig file with root=true
. File masks specified in .editorconfig files, for example *Test.cs
are also taken into account.
Ignore uppercase abbreviations that conflict with a CamelCase naming style
Sometimes you may want to use uppercase abbreviations, acronyms, or initialisms (such as MS for MicroSoft) in CamelCase symbol names. By default, JetBrains Rider reports that as inconsistent camel casing because several uppercase letters go in a row:
To avoid that, you can configure the list of abbreviations to be ignored by the inconsistent naming inspection.
It is important to note that uppercase abbreviations should not contradict the naming style defined for specific kind of identifier.
For example, if you added MS
to the ignored abbreviations, MSBuilder
will be an acceptable name for identifiers with the UpperCamelCase
style, but not for identifiers with lowerCamelCase
or all_lower
naming styles.
Similarly, myMSBuilder
will be OK for lowerCamelCase
- but not for UpperCamelCase
-styled identifiers.
Add an abbreviation to the ignore list
In the editor, place the caret at a highlighted symbol that uses the abbreviation in its name.
Press Alt+Enter or click the action indicator to the left of the caret to open the action list.
Choose Inspection 'Inconsistent Naming' | Add [abbreviation] to the abbreviations list
if necessary, you can choose to save the ignored abbreviation to a specific settings layer:
If you have many abbreviations that should be allowed in symbol names, you can edit the list of ignored abbreviations.
Edit the list of ignored abbreviations
Press Ctrl+Alt+S or choose
(Windows and Linux) or (macOS) from the menu , then choose on the left.Click ... next to the Abbreviations.
Type and abbreviation and click Add. Repeat this for all necessary abbreviations, then click OK.
Alternatively, edit the Abbreviations field manually, using spaces as delimiters.
Click Save in the Settings dialog to apply the modifications and let JetBrains Rider choose where to save them, or save the modifications to a specific settings layer by choosing this layer from the Save selector. For more information, see layer-based settings.
Detect and fix violations of naming rules
JetBrains Rider uses the 'Inconsistent Naming' code inspection to detect violations of naming rules in your code. By default, this inspection is always applied during the design-time code inspection and highlights the detected violations as warnings in the editor. For example, according to the default style, names of interfaces should have 'I' prefix. If an interface name does not match this rule, JetBrains Rider highlights this name and informs you about the problem when you hover over it:
![JetBrains Rider: Highlighted violation of the naming style JetBrains Rider: Highlighted violation of the naming style](https://resources.jetbrains.com.cn/help/img/rider/2024.2/Coding_Assistance__Naming_Style__inspection.png)
If you want to find naming style violations beyond the current file, you can run the 'Inconsistent Naming' inspection in the project or in the entire solution.
Find naming style violations in a specific scope
In the editor, place the caret at a highlighted symbol that has inconsistent naming.
Press Alt+Enter or click the action indicator to the left of the caret to open the action list.
Choose Inspection 'Inconsistent Naming' | Find similar issues in file and then select the desired scope.
All found naming style violations will be displayed in the Problems window.
You can double-click the detected problems to navigate to the code of the corresponding symbols.
For most of the naming style violations highlighted in the editor, JetBrains Rider suggests a quick-fix with a conforming name. You can press Alt+Enter and choose Rename to [conforming name] in the action list.
![Quick-fix for naming style violation Quick-fix for naming style violation](https://resources.jetbrains.com.cn/help/img/rider/2024.2/naming_style_quick_fix.png)
Automatic correction of naming style violations can also be performed in the current file, project or solution using the fix in scope feature.
However, if the symbol with the calculated conforming name already exists in the same namespace, the quick-fix is not suggested. You can fix the naming of such symbol with the Rename refactoring.
Configure and disable automatic checkup of naming rules
If you do not want JetBrains Rider to check naming style in the existing codebase, you can either disable the code inspection that is responsible for it, or disable the automatic checkup of a specific rule. However, even if the automatic checkup is disabled, all naming rules will be respected when JetBrains Rider produces new code with code completion and code generation features, applies code templates and performs refactorings.
Disable automatic checkup of naming style
Clear the Enable 'Inconsistent Naming' inspection checkbox on the page of JetBrains Rider settings Ctrl+Alt+S.
On the
page of JetBrains Rider settings Ctrl+Alt+S, start typing 'Inconsistent Naming', and then clear the checkbox next to the corresponding code inspection.If you use .editorconfig in your solution, you can disable the 'Inconsistent Naming' inspection in the specific scope:
resharper_inconsistent_naming_highlighting=none
Disable automatic checkup of a specific naming rule
In Rider settings Ctrl+Alt+S, go to Naming tab.
and open theDouble-click the desired rule in the list.
In the Edit Rule Settings dialog that opens, clear the Enable inspections checkbox.
Click Save in the Settings dialog to apply the modifications and let JetBrains Rider choose where to save them, or save the modifications to a specific settings layer by choosing this layer from the Save selector. For more information, see layer-based settings.
Use C# naming rules from existing code
If you check out a solution from a public repo or temporarily join a team where a different code naming style is established, you will probably want to follow naming rules in this solution but at the same time not to change your globally configured naming rules.
JetBrains Rider will handle such situations automatically — when you open a new solution where symbol naming differs from your global settings, it will detect the naming rules that diverge from your global settings, modify these rules accordingly, and then save the modified rules to the 'Solution personal' settings layer (.sln.DotSettings.user file next to the solution).
If this happens when you open a new solution, JetBrains Rider will show a notification in the editor:
![JetBrains Rider: Naming rules auto-detection notification JetBrains Rider: Naming rules auto-detection notification](https://resources.jetbrains.com.cn/help/img/rider/2024.2/naming_rules_auto_detect_message.png)
You can click Configure to open the corresponding settings page ( ). On this settings page, the rules that were changed based on the solution code are highlighted with yellow. If you want to use JetBrains Rider's default naming rules or configure naming style in your own way, clear the Use auto-detected rules checkbox.
![JetBrains Rider highlighting automatically-set naming rules with yellow JetBrains Rider highlighting automatically-set naming rules with yellow](https://resources.jetbrains.com.cn/help/img/rider/2024.2/naming_rules_options.png)
Deal with Visual Studio naming style for events
By default, JetBrains Rider suggests $object$On$event$
naming pattern for event subscriptions on fields and On$event$
for event subscriptions on this
, which is used both when JetBrains Rider generates new events, and when it checks the naming style of the existing events. You can change these patterns on the page of JetBrains Rider settings if necessary.
When new events are generated by Visual Studio, it uses another naming pattern: $object$_$event$
. If you have an existing project where events are named this way, and you do not want to rename them, make sure that the Support Microsoft events naming style checkbox on the page of JetBrains Rider settings is selected. This will suppress 'Inconsistent Naming' warnings on these events.